SolarNAPL

Solar-Powered Remediation System for Fluid Recovery

Benefits:

		Quick and easy to install (particularly at remote sites) which leads to earlier start of product recovery and lower construction costs.
		Easy setup and use make it easy for any field staff to operate.
		Trenching and underground line identification can be avoided.
		Faster regulatory approval because there is no external power required (no need to extend power line or install noisy gas driven compressor).
Applications: The Durham Geo Slope Indicator SolarRem™ is a patented solar powered remediation system. Because it uses the sun's energy — a renewable resource — as the only power source necessary to operate recovery pumps, the SolarRem system is particularly friendly to the environment.			SolarNAPL, TR-51600, in field application at a tank farm.. Recovery drum and accessories are not included.

The SolarRem™ system can be configured to run pumps in the following recovery applications:

Installation Advantage:

The SolarRem™ systems are pre-designed, compact, easy to install and operate. They can be installed and operated at remote sites quickly without the need for an external power source. This minimizes construction costs and saves time and coordination efforts while avoiding costly delays. These advantages are particularly meaningful during installation on tank farms where costly trenching and the process of identifying underground lines are avoided.

SolarLNAPL System (TR-51600)

The SolarRem™ SolarLNAPL system is configured to run an optional F.A.P. Plus™ pump skimming system for product recovery.

The controller regulates the battery power used to operate the internal air compressor driving the pneumatic F.A.P. Plus™ pump. The control panel includes a PLC allowing the operator to set system On/Off times consistent with the air requirements of the pump. The On/Off times are user defined and based on the amount of product to recover, the well's recovery rate, and the F.A.P. Plus' pumping rate of approximately 0.2 gpm.

The standard SolarLNAPL system includes the NEMA 4 control panel, a 7.5 gallon air receiver tank, one 120 Watt solar panel, a 105 A•h Advanced Glass Matte (AGM) battery and the Tank Full shut-off. The Tank Full shut-off turns the air supply to the pumping system off when the product tank is full. The F.A.P. Plus™ pump (TR-516), skimmer (TR-517), solar panel mounting pole (TR-51614) and the bracket (TR-51615) must be purchased separately.

TR-51600	SolarNAPL Control System. Includes compressor assembly, air receiver, 120 W solar panel, 105 Ah battery, high fluid level shut-off switch.