The PRM Moisture Separator is internally manufactured and our design incorporates the details to insure a cost effective highly efficient product. These moisture separators are typically used with our SVE and DPE system however they can be incorporated into other processes to remove moisture such as landfill gas applications.

Our standard units are available for 250 to 2500 scfm and liquid capacity from 15 to 400 liquid capacities. Standard construction is heavy gauge carbon steel rated for 28”Hg, UV resistant exterior powder coating, chemical resistant epoxy internal coating, tangential inlet port for optimum liquid removal, internal centrifugal isolation ring and 6” inspection ports.  Options include 2” site tube, single or three float stem, vacuum relief valves,  pumps for condensate removal and various material of construction.

For applications where higher GPM is expected an oversized unit with a mist eliminator is recommended. Consult with the PRM design team to insure proper equipment selection as the higher levels of condensate should be considered in the blower selection.

Custom manufactured units are available to meet your site and budget requirements.

• Heavy gauge carbon steel for vacuum application to 28Hg
• UV exterior coated and internally epoxy coated
• Tangential inlet ports for maximum water removal
• 6” inspection ports at the base for easy clean out
• Options- 3 float stem, optional material of construction, 2” site tube