FAP Plus Zero

PRM offers the FAP Plus Zero water pneumatic product recovery pump. The Zero Water Skimmer incorporates a pneumatic high water shut off switch on the standard 36” rod skimmer to turn the pump off should the water table exceed the 36” travel of the skimmer. When the water table returns to a normal position the system will automatically re-start. The FAP Plus Pump is flexible in design allowing for in well or above grade installations. The pump is capable of creating 17” of mercury suction lift allowing the system to recover high viscosity liquids such as number 6 fuel oils when paired with the high viscosity skimmer.  Optional system components include a pneumatic tank full shut off, well caps, down well tubing and compressor packages.

• The FAP Plus will not recover any water
• The surface PPS gauge identifies the product water interface for easy installation
• 20 plus years field proven operation

POD Skimming Pump

The POD skimming pump is a product recovery pump that is designed to operate with compressed gas such as CO2. This system is an ideal choice for remote sites where power may not be available.      

Solar Skimming Packages – The FAP Plus Zero Water and the POD pump can be operated using the PRM Solar Recovery System. This system incorporates a control panel, air compressor, solar panels and batteries to provide an air source for the pumping system.      

SRX Pneumatic Pump

PRM provides the SRX remediation pumps for recovering contaminated liquids. These pumps are ideal for low flow situations under 10 gallons per minute. The SRX pumps can be configured in a Top Fill, for total fluids recovery or bottom fill for dissolved phase or DNAPL recovery. The SRX pumps simple design does not require any air valve adjustments and have a track record of high performance with the lowest long term maintenance costs. The pump is constructed of 304 stainless steel, nylon and Viton check balls to insure chemical compatibility. Optional accessories include, Quick Connect fittings,  well caps, down well hoses, cycle counters and compressor packages.

• Lowest long term maintenance costs
• Easy maintenance – no air valve adjustments
• Complete disassembly with on wrench
• Competitive value

Electric Submersible Pump, Control Systems

PRM Provides the Grundfos Environmental duty pump ends with Franklin motors to meet your higher flow pumping requirements. These electric pump systems can provide flow rates from 5 – 200 GPM. PRM is a UL and third party certified panel shop insuring the compatibility of our pump/control system. Our system can be a very simple amp overload control to a higher end transducer SCADA based system.   Proper control and sizing of the pump system is important in extending the life and optimum performance of the pump and motor. PRM system engineers will assist you in providing the control panel, level sensors, pump cables and well seals for a comprehensive cost effective system.  Our 25 years of control panel manufacturing combined with the reliability of the Grundfos pumps will insure optimum system operation.

• Grundfos Environmental pumps ends for chemical compatibility
• UL and third Party certified to insure a comprehensive safe Control panel
• Various level control options, transducers, float sensors
• SCADA integrated options